| RECOILER EDGE/STAGGER GUIDE:
For obtaining better Recoiler guiding performance, the Recoiler must follow in perfect unison with sensor signal. The sensor has to be located just after the deflector roll before the Recoiler. The sufficient wrap angle of the strip on the deflector roll shall avoid lateral slippage of the strip as the Recoiler slides in its base.
For a Recoiler guiding application the Recoiler has to move in synchronism & the shifting is proportional to the lateral shift of the strip.
UNCOILER EDGE GUIDE
The Uncoiler Edge Guide System is specially designed for Slitting lines; Pickling Line Uncoiler & Rolling mill pay off.
In uncoiler guiding system, the uncoiler is repositioned to align the strip edge in a predefined position.
The system operates in two modes:
- The strip position is corrected with reference to trimmer cutter position.
- The strip position is maintained wherever fed by the operator.
|
